What must be included in a rams for this work?

Full scope and description of erection of scaffold staircase access towers on construction sites. Site-specific hazard identification and risk ratings. Risk control: falls during erection before stairs and guardrails are installed. Risk control: structural instability from inadequate ties or bracing. Risk control: overloading from material storage on staircase landings. PPE and RPE requirements for all personnel. Emergency procedures and response arrangements. Competency requirements and training records. Communication and briefing procedures. Supervision and monitoring arrangements. Review schedule and sign-off by competent person

RAMS for Scaffold Staircase Tower Erection — UK

UK construction-safety guidance by the Riskora Editorial Team

If your next job involves scaffold staircase tower erection, the safety case starts here. An incorrectly assembled scaffold can fail at any point during its working life, and collapses typically injure or kill multiple workers at once. The legal position for scaffold staircase tower erection is well established. The Work at Height Regulations 2005 and NASC TG20 apply to staircase tower erection. The role of the RAMS is to make the controls explicit, agreed in advance, and capable of standing up to HSE scrutiny.

Under 5 minutesNo training requiredPDF downloadBuilt for UK contractors

Example RAMS

Full scope and description of erection of scaffold staircase access towers on construction sites
Site-specific hazard identification and risk ratings
Risk control: falls during erection before stairs and guardrails are installed
Risk control: structural instability from inadequate ties or bracing

Create a scaffold staircase tower RAMS free

No card required · 1 lifetime safety document · Upgrade when you need more

RAMS Generator UK Risk Assessment Tool Method Statement Builder Free Safety Document Builder

When This Document Is Required

The Work at Height Regulations 2005 and NASC TG20 apply to staircase tower erection. The RAMS must address fall protection during erection and the structural requirements for the tower to support foot traffic loads.

What Must Be Included

Full scope and description of erection of scaffold staircase access towers on construction sites
Site-specific hazard identification and risk ratings
Risk control: falls during erection before stairs and guardrails are installed
Risk control: structural instability from inadequate ties or bracing
Risk control: overloading from material storage on staircase landings
PPE and RPE requirements for all personnel
Emergency procedures and response arrangements
Competency requirements and training records
Communication and briefing procedures
Supervision and monitoring arrangements
Review schedule and sign-off by competent person

Common Mistakes to Avoid

Using a generic template without adapting it to the specific erection of scaffold staircase access towers on construction sites conditions
Not reviewing the document when site conditions change
Missing sign-off from a competent person before work begins
Failing to consider falls during erection before stairs and guardrails are installed
Not addressing structural instability from inadequate ties or bracing
Not briefing all workers on the document content before work starts

Example Scenario

On a live UK contract, a site supervisor has a Friday deadline for a RAMS and is working evenings to get it through review — the kind of pressure most small contractors will recognise. The supervisor opens Riskora on a phone between site visits, selects the preset, checks the pre-populated content against the actual scope, makes the edits the site demands, and has a finished document by the end of the day. The finished document explicitly addresses falls during erection before stairs and guardrails are installed, which the principal contractor would otherwise expect to see written into the pack.

Create Your RAMS in Minutes

Select your trade, pick your hazards, and generate a structured document — no training required.

Create a scaffold staircase tower RAMS free

No card required · 1 lifetime safety document · Paid tiers add branding, sign-off and audit trails

Or learn more about the platform: See plans and one-off options →

Related Resources

Built for real job scenarios · Designed for UK contractors and competent-person review

All documents should be reviewed by a competent person before use on site.

Free safety-document builder

Create a scaffold staircase tower RAMS free — preview before sign-up

Generate a preview first. Sign up only when you want to save, edit or export.

Create a scaffold staircase tower RAMS free Already have a RAMS? Upload and rebuild it

Final RAMS must be reviewed and approved by a competent person before use.

Riskora is an assistive document preparation tool. All documents generated must be reviewed, verified, and approved by a competent person before use on site. Riskora does not replace professional safety judgment, and no output should be treated as a legal compliance guarantee.