What must be included in a rams for this work?

Full scope and description of electrical installation, rewiring, and consumer unit replacement in houses and flats. Site-specific hazard identification and risk ratings. Risk control: electric shock from concealed live wiring in walls and floors. Risk control: fire risk from incorrect connections in consumer units. Risk control: damage to existing circuits serving life-safety systems (smoke detectors, emergency lighting). PPE and RPE requirements for all personnel. Emergency procedures and response arrangements. Competency requirements and training records. Communication and briefing procedures. Supervision and monitoring arrangements. Review schedule and sign-off by competent person

RAMS for Electrical Installation in Domestic Properties — UK

UK construction-safety guidance by the Riskora Editorial Team

Pricing or planning electrical installation in domestic properties? The compliance pack is usually the part that holds the job up — not the work itself. More than half of fatal electrical incidents on UK sites involve work on equipment that was assumed to be isolated but was not proved dead before work began. The legal position for electrical installation in domestic properties is well established. Part P of the Building Regulations requires notification of certain domestic electrical work. A well-written RAMS converts the legal duty into something workers, supervisors and clients can actually use on the day.

Under 5 minutesNo training requiredPDF downloadBuilt for UK contractors

Example RAMS

Full scope and description of electrical installation, rewiring, and consumer unit replacement in houses and flats
Site-specific hazard identification and risk ratings
Risk control: electric shock from concealed live wiring in walls and floors
Risk control: fire risk from incorrect connections in consumer units

Create a electrical installation domestic RAMS free

No card required · 1 lifetime safety document · Upgrade when you need more

RAMS Generator UK Risk Assessment Tool Method Statement Builder Free Safety Document Builder

When This Document Is Required

Part P of the Building Regulations requires notification of certain domestic electrical work. BS 7671 applies to all electrical installations. A RAMS is increasingly required by housing associations, landlords, and warranty providers.

What Must Be Included

Full scope and description of electrical installation, rewiring, and consumer unit replacement in houses and flats
Site-specific hazard identification and risk ratings
Risk control: electric shock from concealed live wiring in walls and floors
Risk control: fire risk from incorrect connections in consumer units
Risk control: damage to existing circuits serving life-safety systems (smoke detectors, emergency lighting)
PPE and RPE requirements for all personnel
Emergency procedures and response arrangements
Competency requirements and training records
Communication and briefing procedures
Supervision and monitoring arrangements
Review schedule and sign-off by competent person

Common Mistakes to Avoid

Using a generic template without adapting it to the specific electrical installation, rewiring, and consumer unit replacement in houses and flats conditions
Not reviewing the document when site conditions change
Missing sign-off from a competent person before work begins
Failing to consider electric shock from concealed live wiring in walls and floors
Not addressing fire risk from incorrect connections in consumer units
Not briefing all workers on the document content before work starts

Example Scenario

A specialist contractor delivering a contract in Reading has discovered that the existing template they have been using does not actually cover the activities on the new job — they need a fresh RAMS. Using Riskora, they pick the relevant trade preset, drop in the project address, refine the pre-loaded hazards for electrical installation in domestic properties, and export a clean PDF ready for sign-off the same afternoon. The finished document explicitly addresses electric shock from concealed live wiring in walls and floors, which the principal contractor would otherwise expect to see written into the pack.

Create Your RAMS in Minutes

Select your trade, pick your hazards, and generate a structured document — no training required.

Create a electrical installation domestic RAMS free

No card required · 1 lifetime safety document · Paid tiers add branding, sign-off and audit trails

Or learn more about the platform: See plans and one-off options →

Related Resources

Built for real job scenarios · Designed for UK contractors and competent-person review

All documents should be reviewed by a competent person before use on site.

Free safety-document builder

Create a electrical installation domestic RAMS free — preview before sign-up

Generate a preview first. Sign up only when you want to save, edit or export.

Create a electrical installation domestic RAMS free Already have a RAMS? Upload and rebuild it

Final RAMS must be reviewed and approved by a competent person before use.

Riskora is an assistive document preparation tool. All documents generated must be reviewed, verified, and approved by a competent person before use on site. Riskora does not replace professional safety judgment, and no output should be treated as a legal compliance guarantee.