Build a site-specific SWMS for Australian high-risk construction work
Create an Australian SWMS from your scope of works, site task or client brief. Include hazards, controls, monitoring, review and worker sign-off — aligned with WHS Regulation 291/299 and PCBU duties. 100+ industries supported.
Australia (SWMS) example document — Tenancy 3 Commercial Fit-Out — 88 Latrobe Street, Melbourne. Client: Latrobe Holdings Pty Ltd. Site: 88 Latrobe Street, Tenancy 3, Melbourne, VIC 3000. Scope: Cat-B fit-out of an existing 220 m² ground-floor tenancy: demolition of partitions, new steel-stud partitioning, suspended grid ceiling, joinery, electrical and data first/second fix, painting and floor coverings. Works occur during occupied-building hours under a building-manager permit. SWMS prepared because HRCW (work > 2 m on scissor lifts and powered mobile plant) is involved.
Full version
Preview first. No card needed. Download when you're happy.
- Free to start
- No signup to preview
- Done in ~60 seconds
Riskora helps structure your safety document. A competent person must review it before use. Structured for Australian WHS — Regulation 291/299, PCBU duties, hierarchy of controls and worker sign-on.
- UK · IE · US · CA · AU · NZ
- RAMS · SWMS · JHA · JSA · COSHH · Task Analysis · Toolbox Talks
- Site-specific — not a blank template
- First document free · No card required
- The principal contractor needs a SWMS before site induction.
- An activity falls under one of the 18 HRCW categories.
- Your last SWMS got knocked back as too generic.
- An inspector or auditor wants to see the SWMS on site.
- The PCBU's request for SWMS
- Your scope of works or quote
- A supervisor's text message
- Previous SWMS to update for this site
- Tender or pre-qual requirements
What Riskora builds into every SWMS
Job-specific hazards
Hazards drawn from the task, the site and the scope you describe — not a stock list.
Hierarchy of controls
Elimination first, PPE last. Initial and residual risk shown side by side.
Step-by-step method
Sequenced steps with a person responsible for each, written for this SWMS.
PPE & equipment
Task-specific PPE, plant and inspection requirements.
Emergency arrangements
First aid, fire, spill and rescue arrangements specific to the work.
Chemicals & substances
Substance prompts appear when materials in scope need a hazardous-substance assessment.
Permits & hold points
Hot work, working at height, confined space and inspection hold points where they apply.
Briefing & sign-off
Pre-start briefing register, version lock and an audit-ready workflow.
Principal-contractor ready SWMS PDF
Branded, paginated PDF you can issue without reformatting.
A SWMS, not a UK RAMS with the spelling changed
Native Australian terminology — PCBU, HRCW, sign-on, White Card. Hazards mapped to the WHS hierarchy of controls. Sign-on register and supervisor sign-off built into the PDF.
Riskora isn't a blank template or a generic AI text generator
Riskora asks for your job and site context, then structures a client-ready, site-specific SWMS: hazards, controls, method steps, PPE, emergency arrangements and sign-off — not a paragraph of AI prose. You stay in control of every section and the output is built for an audit-ready workflow.
What your SWMS actually contains
Riskora builds a structured, client-facing document — not a generic AI paragraph. Every section is shaped around your job, your site and your team.
Hazards
Task-specific hazards for the job, captured row by row — not a generic list pulled from an old SWMS.
Controls
Control measures mapped to each hazard with residual risk scoring after controls are applied.
PPE
PPE requirements tied to the activity and site, ready to brief to the team.
Method steps
Step-by-step method statement structured around how the work is actually sequenced on site.
Emergency arrangements
First aid, rescue plan, emergency contacts and site-specific escalation routes.
COSHH prompts
Substance prompts when the work involves chemicals, dusts, fumes or sealants — flagged early, not missed at review.
Sign-off
Operative sign-off captured against the document — names, dates and acknowledgement of the brief.
Version history
Every change tracked so you can show what was issued, when, and which version the team signed.
Approval status
Clear approval state on every document — draft, in review, approved, issued — visible across the team.
Audit trail
Who created it, who reviewed it, who signed it. A complete trail you can hand to a principal contractor or auditor.
From copied-and-pasted to site-specific
The reason SWMS get rejected is rarely the format — it's that the document is obviously generic. Riskora rebuilds it around this job, this site and this task.
Generic template copied from an old job.
- • Hazards and controls that don't match this site or task.
- • Method steps written for a different sequence of work.
- • No emergency arrangements specific to the location.
- • Client flags it as generic and asks for a rewrite.
Site-specific document structured around this job, site and task.
- • Hazards captured from the actual scope you pasted in.
- • Method steps sequenced for how the work runs on site.
- • Emergency arrangements and rescue plan tied to the location.
- • Approved internally, briefed to the team, signed off and stored.
From job details to signed-off document
A four-step workflow used by contractors, consultants and safety teams to turn informal job details into client-ready safety paperwork.
- 1Paste job details
Drop in a client email, a WhatsApp from the site manager, a scope of works or a tender note. Anything that describes the job.
- 2Riskora structures the document
Riskora turns your brief into hazards, controls, method steps, PPE, emergency arrangements and COSHH prompts.
- 3Review, edit and download
You stay in control of every section. Tweak anything, then download a clean PDF or share a link.
- 4Brief the team and record sign-off
Brief operatives, capture their sign-off and keep a full audit trail of who signed which version.
Built by people who've written this paperwork on real sites
Riskora is built by a founder with hands-on site and document experience — designed for contractors, consultants and safety teams who need to issue, brief and prove safety paperwork without losing a day to admin.
- Built for contractors, consultants and teams
Solo trades, principal contractors and in-house safety teams all run on the same workflow. - Supports multiple countries
UK, Ireland, Australia, New Zealand, US and Canada — wording and document types match the local standard. - Not just documents
Sign-off, approvals, version history and an audit trail — the management workflow around the paperwork.
Describe the job details — get a structured SWMS
Describe the job details, scope of works, email or WhatsApp message. Riskora structures the rest.
Preview first. No card needed. Download when you're happy.
Questions for this exact situation
Riskora helps structure a site-specific safety document. It does not replace competent review, site supervision, client requirements or legal duties. Always check the final document before issue.