OSHA construction safety documents — the full stack, built in minutes
US construction sites need JHAs, site safety plans, toolbox talks and permits aligned with 29 CFR 1926 and OSHA guidance. Riskora builds the OSHA construction safety document stack around your actual scope. 100+ industries supported.
US (JHA) example document — Rooftop HVAC Unit Changeout — 1400 Larimer Commerce Center, Denver. Client: Larimer Commerce Center Property Management. Site: 1400 Larimer Commerce Center, Denver, CO 80202. Scope: Removal and replacement of two 15-ton packaged rooftop units on an occupied four-story commercial building: refrigerant recovery, electrical lockout, 90-ton crane lift from a permitted lane closure, curb adaptation, duct transition welding under hot work permit, gas reconnection and commissioning. Works programmed over 5 working days with a crew of 5.
Full version
- Free to start
- No signup to preview
- Done in ~60 seconds
Not a blank template. Not loose AI prose. A structured safety document — the sections a competent reviewer expects to see — from a brief you can paste in under a minute.
- UK · IE · US · CA · AU · NZ
- RAMS · SWMS · JHA · JSA · COSHH · Task Analysis · Toolbox Talks
- Site-specific — not a blank template
- First document free · No card required
- Your GC is asking for the OSHA safety document pack before mobilization.
- Your JHA + site safety plan are inconsistent with each other.
- An OSHA inspection is coming and your documentation is thin.
- You need a Cal/OSHA variant with IIPP references for California work.
- A client email asking for paperwork
- A site manager's WhatsApp or text message
- Scope of works or job description
- Tender or PQQ notes for the package
- A previous RAMS to update or improve
What Riskora builds for this safety document
Every section is built around your actual scope of work and the framework this page is about — not boilerplate. You confirm what applies to the site before you issue it.
Job Hazard Analysis (JHA)
OSHA 3071 structured JHA — steps, hazards, controls, PPE.
Site-specific safety plan
Project-level plan referencing 29 CFR 1926 requirements.
Toolbox talks
Pre-shift briefs the crew actually reads and signs.
Permits
Hot work, confined space, LOTO, energized work permits.
Emergency Action Plan
Alignment with 1910.38 / 1926.35 — first aid, muster, reporting.
Sign-off + toolbox register
Competent person sign-off + crew signed on.
A site-ready safety document, ready to review
See how Riskora shapes your brief into a safety document your reviewer will accept — every section structured, edit anything before you issue it.
Not a template. Not loose AI prose. A structured safety document.
Most 'safety document template' downloads are blank docs you still have to fill in, and generic AI tools produce loose prose a competent reviewer will bin. Riskora produces a structured safety document — with the sections the relevant framework expects — from a brief you can paste in under a minute.
What your JHA actually contains
Riskora builds a structured, client-facing document — not a generic AI paragraph. Every section is shaped around your job, your site and your team.
Hazards
Task-specific hazards for the job, captured row by row — not a generic list pulled from an old JHA.
Controls
Control measures mapped to each hazard with residual risk scoring after controls are applied.
PPE
PPE requirements tied to the activity and site, ready to brief to the team.
Method steps
Step-by-step method statement structured around how the work is actually sequenced on site.
Emergency arrangements
First aid, rescue plan, emergency contacts and site-specific escalation routes.
COSHH prompts
Substance prompts when the work involves chemicals, dusts, fumes or sealants — flagged early, not missed at review.
Sign-off
Operative sign-off captured against the document — names, dates and acknowledgement of the brief.
Version history
Every change tracked so you can show what was issued, when, and which version the team signed.
Approval status
Clear approval state on every document — draft, in review, approved, issued — visible across the team.
Audit trail
Who created it, who reviewed it, who signed it. A complete trail you can hand to a principal contractor or auditor.
From copied-and-pasted to site-specific
The reason JHA get rejected is rarely the format — it's that the document is obviously generic. Riskora rebuilds it around this job, this site and this task.
Generic template copied from an old job.
- • Hazards and controls that don't match this site or task.
- • Method steps written for a different sequence of work.
- • No emergency arrangements specific to the location.
- • Client flags it as generic and asks for a rewrite.
Site-specific document structured around this job, site and task.
- • Hazards captured from the actual scope you pasted in.
- • Method steps sequenced for how the work runs on site.
- • Emergency arrangements and rescue plan tied to the location.
- • Approved internally, briefed to the team, signed off and stored.
From job details to signed-off document
A four-step workflow used by contractors, consultants and safety teams to turn informal job details into client-ready safety paperwork.
- 1Paste job details
Drop in a client email, a WhatsApp from the site manager, a scope of works or a tender note. Anything that describes the job.
- 2Riskora structures the document
Riskora turns your brief into hazards, controls, method steps, PPE, emergency arrangements and COSHH prompts.
- 3Review, edit and download
You stay in control of every section. Tweak anything, then download a clean PDF or share a link.
- 4Brief the team and record sign-off
Brief operatives, capture their sign-off and keep a full audit trail of who signed which version.
Built by people who've written this paperwork on real sites
Riskora is built by a founder with hands-on site and document experience — designed for contractors, consultants and safety teams who need to issue, brief and prove safety paperwork without losing a day to admin.
- Built for contractors, consultants and teams
Solo trades, principal contractors and in-house safety teams all run on the same workflow. - Supports multiple countries
UK, Ireland, Australia, New Zealand, US and Canada — wording and document types match the local standard. - Not just documents
Sign-off, approvals, version history and an audit trail — the management workflow around the paperwork.
Build your safety document now — done in minutes
Describe the job details, an email from the client, or a rough scope of works. Riskora shapes the rest around the actual task so you can review, edit and issue today.
Questions for this exact situation
Riskora helps structure a site-specific safety document. It does not replace competent review, site supervision, client requirements or legal duties. Always check the final document before issue.